Training – CADVision Systems SOLIDWORKS https://www.cad-vision.com.my Preferred SOLIDWORKS Partner Wed, 23 Jun 2021 03:02:38 +0000 en-US hourly 1 SOLIDWORKS Electrical 3D Course https://www.cad-vision.com.my/solidworks-electrical-3d-course/ https://www.cad-vision.com.my/solidworks-electrical-3d-course/#respond Thu, 07 Jan 2021 07:50:40 +0000 https://www.cad-vision.com.my/?p=16678 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS Electrical 3D Course

SOLIDWORKS Electrical 3D enables you to easily integrate your electrical schematic designs into your SOLIDWORKS 3D product model. This course is focused on 2D Schematic Design.

Prerequisites: Provide standalone, easy-to-use, electrical design tools that enable you to efficiently define electrical interconnections for complex electrical systems.

Length: 1 day

  • What are Assemblies?
  • Stages in the Process
  • Unarchiving a Project
  • SOLIDWORKS Assembly
  • Exercise 1: Assembly Creation
  • Cabinets, Ducts, Rails
  • Stages in the Process
  • Inserting Components
  • Inserting Rails
  • Inserting Ducts
  • Exercise 2: Cabinets
  • What is a component?
  • Stages in the Process
  • Exercise 3: Component Intelligence
  • Insert Components
  • Stages in the Process
  • Align Components
  • Inserting Terminals
  • Exercise 4: Insert Components
  • Routing Wires
  • Stages in the Process
  • Routing Path
  • Route Wires
  • Exercise 5: Routing Wires
  • Routing Cables
  • Stages in the Process
  • Route Cables
  • Set Origin Destination of Cables by Location
  • Exercise 6: Routing Cables

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-electrical-3d-course/feed/ 0 SOLIDWORKS Electrical Advanced Course https://www.cad-vision.com.my/solidworks-electrical-advanced-course/ https://www.cad-vision.com.my/solidworks-electrical-advanced-course/#respond Thu, 07 Jan 2021 07:19:46 +0000 https://www.cad-vision.com.my/?p=16681 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS Electrical – Advanced Course

SOLIDWORKS Electrical Advanced teach you more advanced topics not
covered in the standard SOLIDWORKS Electrical training courses,
specifically, harness in SOLIDWORKS Electrical Schematic and 3D, symbol creation methods, schematic GA layouts, and optimized wiring, wires and equipotentials, reports, creation, modification, configuration, PLC, detailed design, I/O’s, configuration, design rule checks, and error resolution, multi-deck terminals, and Black boxes

Prerequisites: SOLIDWORKS Electrical Schematic and SOLIDWORKS Electrical 3D (Recommended to be taken at the same time as Electrical Advanced)

Length: 1.5 Days

  • Creating a Harness
  • Stages in the Process
  • Project Harnesses
  • Exercise 1: Harness
  • Multi-Level Terminal
  • Stages in the Process
  • Terminal Numbering
  • Stages in the Process
  • Black Box Circuits
  • Exercise 2: Multi Deck Terminal / Black Box
  • Creating a Library
  • Stages in the Process
  • Library Filters
  • Stages in the Process
  • Exercise 3: Library, Classification Management
  • Import DXF DWG Files
  • Stages in the Process
  • File Definition
  • Symbol and Title Block Mapping
  • Convert Attributes
  • Configuration Files
  • Review Results
  • Exercise 4: Import DXF DWG Files
  • Import Parts
  • Stages in the Process
  • Exercise 5: Import Manufacturer Parts
  • ERP Database Connection
  • Stages in the Process
  • ERP Connection
  • Customize User Data
  • ERP Data Flow
  • Update Data
  • Exercise 6: ERP Database Connection
  • Import Export To Excel
  • Stages in the Process
  • Excel Export/Import Configuration
  • Export To Excel
  • Import From Excel
  • Replace Data
  • Stages in the Process
  • Exercise 7: Export To, Import From Excel
  • Auto Generate Drawings From Excel
  • Stages in the Process
  • Excel Macros and Variables
  • Linking SQL Tables to Excel
  • Inserting Drawings and Types
  • Exercise 8: Excel Automation
  • Macros Variables
  • Reports
  • Lesson Structure
  • Warning
  • Stages in the Process
  • Basic Query
  • Adding Fields
  • Filtering Fields
  • Writing a Complex Query
  • Table Aliases
  • User Data
  • Counter
  • Part Descriptions
  • Can Sum
  • Location Parts
  • Exercise 9: Report Creation
  • Report Query

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-electrical-advanced-course/feed/ 0 SOLIDWORKS Manage Course https://www.cad-vision.com.my/solidworks-manage-course/ https://www.cad-vision.com.my/solidworks-manage-course/#respond Thu, 07 Jan 2021 06:49:10 +0000 https://www.cad-vision.com.my/?p=16663 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS Manage Course

The SOLIDWORKS Manage Course training manual is an introductory guide to help get started in this expansive software and application integrations enabled by SOLIDWORKS PDM Professional to include a comprehensive set of capabilities that you can use and distribute to many areas of your business. It covers topics including basic setup, routine maintenance, connecting to PDM, Document and Record objects, Users and Groups, various field types, and the Web Client. This manual is targeted at anyone getting started with SOLIDWORKS Manage, or anyone who needs a refresher on how to get started.

Length: 2 days

  • Planning for SOLIDWORKS Manage
  • System Architecture
  • Configuration File
  • Case Study: Connecting to SOLIDWORKS Manage
  • Essential Administrative Options
  • Case Study: System Options
  • Numbering Schemes
  • Record Object Types
  • Requirements for Connecting
  • Case Study: Installing the Add-In
  • Creating a PDM Object
  • Record Object
  • Permissions
  • Document Object
  • File Templates
  • Fields
  • Organizing Fields
  • Field Groups
  • Numbering by Field Group
  • Global Variables
  • Importing Users
  • Group
  • Bills of Materials
  • Creating Bills of Materials
  • Backing Up
  • Restoring the Environment
  • Upgrading SOLIDWORKS Manage
  • The Web Interface
  • Web Interface and PDM Objects

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-manage-course/feed/ 0 SOLIDWORKS Electrical Schematic Course https://www.cad-vision.com.my/solidworks-electrical-schematic-course/ https://www.cad-vision.com.my/solidworks-electrical-schematic-course/#respond Thu, 07 Jan 2021 06:40:51 +0000 https://www.cad-vision.com.my/?p=16675 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS Electrical Schematic Course

SOLIDWORKS Electrical Schematic teaches you how to optimize your drawings and designs for manufacturability so you can maximize quality, avoid rework, and decrease time to market. This course is focused on 2D Schematic Design.

Prerequisites: Provide standalone, easy-to-use, electrical design tools that enable you to efficiently define electrical interconnections for complex electrical systems.

Length: 3 days

  • SOLIDWORKS Electrical
  • Stages in the Process
  • Starting SOLIDWORKS Electrical
  • What are Projects?
  • Project Templates
  • Project Configurations
  • How is Project Structured?
  • Stages in the Process
  • Exercise 1: Creating a Template
  • What are Environments?
  • Stages in the Process
  • Draw Multiple Wires
  • Exercise 2: Modifying a Template
  • What are Drawing Types?
  • Stages in the Process
  • Existing and Archived Projects
  • Line Diagram Symbols
  • Adding Cables
  • Stages in the Process
  • Symbols Panel
  • Schematic Symbols
  • Symbol Properties
  • Exercise 3: Drawing Types
  • What is a component?
  • Stages in the Process
  • Description Columns
  • Symbol Component Association
  • Exercise 4: Symbols and Components
  • What are the Manufacturers Parts?
  • Stages in the Process
  • Finding Manufacturer Parts
  • Electrical Assemblies
  • Exercise 5: Manufacturers Parts
  • Equipotentials and Wires
  • Stages in the Process
  • Wire Style Manager
  • Replacing Wires
  • Equipotential Numbering Results
  • Wire Numbering Results
  • Using Nodal Indicators
  • Exercise 6: Wires and Equipotentials
  • What is Cabling?
  • Stages in the Process
  • Cables
  • Detailed Cabling
  • Terminal Strip
  • Pin to Pin Connections
  • Copy and Paste
  • Exercise 7: Cabling
  • Symbols and Standards
  • Stages in the Process
  • Symbols Manager
  • Symbol Properties
  • Circuits, Terminals, Types
  • Multiple Attribute
  • Splitting Attribute Data
  • Add to Library
  • Copy, Paste Symbol
  • Exercise 8: Symbol Creation
  • What are Macros?
  • Stages in the Process
  • Creating and Adding Macros
  • Exercise 9: Macros
  • What is Cross Referencing?
  • Stages in the Process
  • Exercise 10: Cross Referencing
  • What are Origin-Destination Arrows?
  • Stages in the Process
  • Origin-Destination Arrows
  • Exercise 11: Origin-Destination Arrows
  • What is a PLC?
  • Stages in the Process
  • Adding a New Scheme
  • Adding a PLC Mark
  • Inserting a PLC
  • Editing a PLC
  • Exercise 12: Adding a PLC
  • How is PLCs Automated?
  • Stages in the Process
  • PLC Mark, Part
  • IO Manager
  • Exercise 13: Automated Programmable Logic Control
  • Connectors
  • Stages in the Process
  • Insert Connector
  • Connector Insertion
  • Exercise 14: Connectors
  • What are 2D Cabinet Layouts?
  • Stages in the Process
  • Exercise 15: 2D Cabinet Layouts
  • What are Design Rule Checks?
  • Stages in the Process
  • Unconnected Pins
  • Equipotential Conflicts
  • Max. Terminal Wires
  • Duplicated Parent Symbols
  • Child Symbols without Parent
  • Empty Terminal Strip
  • Duplicated Terminals
  • Exercise 16: Design Rule Checks
  • What are Reports?
  • Stages in the Process
  • Report Templates
  • Report Columns
  • Column Formula
  • SQL Query Column Variable
  • Sort and Break
  • Exercise 17: Reports
  • What are Views?
  • Stages in the Process
  • Exercise 18: Simple Reports

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-electrical-schematic-course/feed/ 0 SOLIDWORKS Composer https://www.cad-vision.com.my/solidworks-composer-course/ https://www.cad-vision.com.my/solidworks-composer-course/#respond Thu, 07 Jan 2021 06:04:28 +0000 https://www.cad-vision.com.my/?p=16670 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS Composer Course

SOLIDWORKS Composer course teaches you how to use to create 2D and 3D output from existing CAD data.

Prerequisites: Experience with the Windows operating system.

Length: 3 days

  • Quick Look at SOLIDWORKS Composer
  • What is the SOLIDWORKS Composer Application?
  • Notes on SOLIDWORKS Composer
  • SOLIDWORKS Composer Terminology
  • SOLIDWORKS Composer User Interface
  • Views
  • Navigation Tools
  • Updating Views
  • Collaborative Actors
  • Camera Views
  • Transform
  • Creating 2D Output
  • View Mode/Animation Mode
  • Exercise 1: Navigation Tools
  • Rendering Tools
  • Camera Alignment Tools
  • Custom Rendering
  • Digger
  • Exercise 2: Digger
  • Exercise 3: Updating Views
  • Visibility Tools
  • Exploded Views
  • Collaborative Actors
  • Styles
  • Vector Graphics Output
  • Exercise 4: Exploded View
  • Exercise 5: Styles
  • Exercise 6: Markups and Annotations
  • Exercise 7: Visibility and Rendering Tools
  • Importing Files
  • Paper Space
  • Update Views with Selected Actors
  • Align Actors
  • Explode Lines
  • Custom Views
  • Linking Between Views
  • Exercise 8: Importing Assemblies
  • Exercise 9: Custom Views
  • Bill of Materials
  • Vector Graphics Output
  • Another BOM Table
  • Assembly Level BOM
  • Assembly Selection Mode
  • Exercise 10: Exploded Views, BOMs, and Callouts
  • Exercise 11: Assembly Level BOMs
  • Exercise 12: Vector Graphics Files
  • Selections
  • Textures
  • Lighting
  • Scenes
  • High-Resolution Image
  • Exercise 13: Lights and Textures
  • Exercise 14: Render Effect
  • Exercise 15: Merging and Aligning Actors
  • Timeline Pane
  • Location Keys
  • Exercise 16: Creating an Explode Animation
  • Views for Animation
  • Improving the Animation
  • Digger Keys
  • Selections in the Key Track
  • Events
  • Animating Collaborative Actors
  • Exercise 17: Managing the Timeline Pane
  • Exercise 18: Animating Collapse Sequences
  • Exercise 19: Events
  • Camera Keys
  • Grids
  • Additional Camera Functionality
  • Exercise 20: Camera Keys 1
  • Exercise 21: Camera Keys 2
  • Animation Library Workshop
  • Animation Special Effects
  • Assembly Selection Mode in Animations
  • Scenarios
  • Exercise 22: Animating Actors and the Digger
  • Exercise 23: Animation Library Workshop
  • Update an Entire Assembly
  • Changing the Geometry of an Actor
  • Exercise 24: Updating from CAD
  • Product Files
  • Product Orientation
  • Exercise 25: Projects
  • Preparing a File for Publishing
  • Publishing to PDF
  • Publishing Inside Microsoft PowerPoint
  • Publishing to HTML
  • Linked SVG Files
  • Publishing Multiple Views
  • Exercise 26: Publishing to PDF
  • Exercise 27: Publishing Inside Microsoft Word
  • Exercise 28: Publishing Inside HTML
  • Exercise 29: Publishing SVG Documents

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-composer-course/feed/ 0 SOLIDWORKS Simulation Premium: Nonlinear & Dynamics Course https://www.cad-vision.com.my/solidworks-simulation-premium-nonlinear-dynamics/ https://www.cad-vision.com.my/solidworks-simulation-premium-nonlinear-dynamics/#respond Thu, 07 Jan 2021 05:48:22 +0000 https://www.cad-vision.com.my/?p=16667 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS Simulation premium: nonlinear & dynamics Course

SOLIDWORKS Simulation Premium: Nonlinear & Dynamics Course. The best value for what you get! This 4-day class, created for SOLIDWORKS Simulation Premium users, will raise FEA skills to the next level! The first part of the course will teach you the basic and advanced topics in non-linear stress analysis. You will learn how to deal with models that exhibit large displacements and/or yielding, discuss and practice the use of many material models available in SOLIDWORKS Simulation Premium, and, most importantly, how to drive a non-linear analysis to successful completion. The second part of the course will expose you to various advanced topics in Dynamics. The material covered includes the time-dependent analysis, harmonic analysis, and random vibrations. (Note, this course is a combination of the SOLIDWORKS Simulation Premium: Nonlinear and SOLIDWORKS Simulation Premium: Dynamics courses).

Prerequisites: Must have attended the basic SOLIDWORKS Simulation class, or must have an experience with SOLIDWORKS + working basic knowledge of finite elements and of basic mechanical principles. The knowledge of basic principles in Vibrations is strongly recommended, but not required.

Length: 4 days

  • Nonlinear elasticity
  • Hyperelasticity (Mooney-Rivlin, Ogden)
  • Plasticity (von Mises, isotropic/kinematic/mixed hardening rules)
  • Visco-elasticity and creep
  • 3D nonlinear gap/contact analysis (with or without material nonlinearities).
  • Solution control techniques (force, displacement, and Arc-Length controls)
  • Equilibrium Iterations schemes (Newton-Raphson, modified Newton-Raphson)
  • Termination schemes (convergence and divergence criteria)
  • Adaptive automatic stepping algorithm
  • Prescribed non-zero displacements associated with time curves
  • Deformation dependent loading
  • Analysis stabilization techniques
  • Deflected shape plots
  • Displacement and stress color filled contour plots
  • Animation of deflected shape, displacement, and stress contour plots
  • X-Y plots for response quantities Isoplanes and sectioning
  • Modal time history analysis
  • Steady-state harmonic analysis
  • Random vibration
  • Response spectrum analysis
  • Introduction to nonlinear dynamic simulation
  • Rayleigh damping, modal damping, composite damping
  • Load vs. time data for nodal forces, pressure loads
  • Uniform and nonuniform base excitations in the time or frequency domain for displacement, velocity and acceleration
  • Harmonic excitation for nodal forces, pressure loads, uniform and nonuniform ground motions and varied phase angles
  • Power spectral density (PSD) excitation curves for nodal forces, pressure loads, uniform and nonuniform ground motions

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-simulation-premium-nonlinear-dynamics/feed/ 0 SOLIDWORKS Simulation & SOLIDWORKS Simulation Professional Course https://www.cad-vision.com.my/solidworks-simulation-solidworks-simulation-professional-course/ https://www.cad-vision.com.my/solidworks-simulation-solidworks-simulation-professional-course/#respond Thu, 07 Jan 2021 05:40:07 +0000 https://www.cad-vision.com.my/?p=16664 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS Simulation & SOLIDWORKS Simulation Professional Course

SOLIDWORKS Simulation & SOLIDWORKS Simulation Professional is designed to make SOLIDWORKS users productive more quickly with the SOLIDWORKS Simulation Professional analysis package. The 4-day training class provides in-depth coverage on the basics of Finite Element Analysis (FEA), covering the entire process from meshing to evaluation of results for parts and assemblies. It discusses linear stress analysis covering the entire analysis process from meshing to evaluation of results for parts and assemblies, gap/contact analysis, and best practices. 4th day covers heat transfer analysis, frequency analysis, fatigue, stability analysis based on linear buckling concepts, 2D simulations (plane stress, strain, and axisymmetry), and pressure vessel modulus. Examples of parts and assemblies including those with various gap/contact conditions are reviewed.

Prerequisites: Knowledge of SOLIDWORKS and basic mechanical engineering concepts is recommended.

Length: 4 days

  • Key concepts and principles
  • FEA and CAD modeling approaches
  • Boundary Conditions
  • Loads
  • Elements
  • Linear vs non-linear analysis
  • Preprocessing
  • Analysis set up, Results visualization, and post-processing
  • Meshing options
  • Mixed Meshing options
  • Adaptive Meshing
  • Loads and Restraints
  • Small vs. Large displacement
  • Linear static analysis of parts
  • Gaps/Contact and Advanced Assembly Analysis
  • Assemblies with special connectors and bolts
  • Frequency Analysis
  • Effect of In-plane loading on thin-walled structures
  • Linear Buckling Analysis
  • Heat Transfer: Conduction, Convection, and Radiation
  • Thermal Stress Analysis with contacts
  • Drop Test
  • Optimization
  • Fatigue analysis (S-N curves, single/multiple invent formulations)
  • 2D Simulations (plane stress, plane strain, and axisymmetry)
  • Pressure vessel modulus

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-simulation-solidworks-simulation-professional-course/feed/ 0 SOLIDWORKS Plastics Course https://www.cad-vision.com.my/solidworks-plastics-course/ https://www.cad-vision.com.my/solidworks-plastics-course/#respond Thu, 07 Jan 2021 04:29:08 +0000 https://www.cad-vision.com.my/?p=16658 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS Plastics Course

SOLIDWORKS Plastics teaches you how to use specialized simulation software tools to predict how melted plastic flows during the injection molding process. Predicting how the plastic will flow enables you to predict manufacturing defects such as weld lines, air traps, short shots, and sink marks. By predicting these defects, you can change the part or mold geometry, the processing conditions, or the plastic material itself to eliminate or minimize them, saving energy, material, time, and money. The SOLIDWORKS Plastics course covers all the features and functions of both SOLIDWORKS Plastics Professional (for part designers) and SOLIDWORKS Plastics Premium (for mold designers).

Prerequisites: SOLIDWORKS Essentials and fundamental knowledge of plastic materials, plastic part design, and/or injection mold design

Length: 3 days

  • Basic Flow Analysis
  • Stages in the Process
  • New Study
  • Injection Process
  • Element Types
  • Units
  • User Interface
  • Injection Units
  • Material
  • Boundary Conditions
  • Injection Location
  • Create Mesh
  • Running a Flow Analysis
  • Flow Results
  • Exercise 1: Basic Flow Analysis
  • Detecting Short Shots
  • Stages in the Process
  • Fill Properties
  • Flow Front Central Temperature
  • Configurations
  • Exercise 2: Short Shots
  • Automation Tools
  • Stages in the Process
  • Duplicate Study
  • Plastics File ManagementBatch Manager
  • Summary and Report
  • Exercise 3: Design Changes
  • Injection Locations and Sink Marks
  • Stages in the Process
  • Injection Location Rules
  • Visibility Commands
  • Sink Marks
  • Exercise 4: Minimizing Sink Marks (1)
  • Exercise 5: Minimizing Sink Marks (2)
  • Material Properties
  • Stages in the Process
  • User-defined Database
  • Resin Properties
  • Temperature Properties
  • Heat Transfer Properties
  • Viscosity
  • PVT Data
  • Mechanical Properties
  • Mesh Manipulation
  • Stages in the Process
  • Local Mesh Refinement
  • Edit/Review
  • Element Issues
  • Leader Lines
  • Edit Study
  • Solid Mesh
  • Solid mesh size
  • Exercise 6: Mesh Repairs
  • Detecting Air Traps
  • Stages in the Process
  • Air Traps
  • Venting
  • Exercise 7: Air Traps
  • Gate Blush
  • Stages in the Process
  • Runner Elements
  • Gate Blush
  • Packing and Cooling
  • Stages in the Process
  • Flow/Pack Switch
  • Pack Stage
  • Pack Analysis
  • Pack Results
  • X-Y Plot
  • Clipping Plane Mode
  • Isosurface Mode
  • Cooling Times
  • Exercise 8: Packing and Cooling Times
  • Exercise 9: Optimizing Cooling Time
  • Multiple Injection Locations
  • Multiple Cavity Molds
  • Stages in the Process
  • Mold Layouts
  • Runner System
  • Runner Channel Design
  • Clamping Force
  • Runner Wizard Channel Design
  • Family Mold Layout
  • Using Runner-Balancing
  • Exercise 10: Multiple Cavity Molds
  • Exercise 11: Runner-Balancing
  • Exercise 12: Clamp Force
  • Symmetry Analysis
  • Stages in the Process
  • Symmetrical Runner
  • Symmetry Face
  • Exercise 13: Half Symmetry
  • Valve Gates and Hot Runners
  • Stages in the Process
  • Hot Runners
  • Valve Gates
  • Reaction Injection Molding
  • Stages in the Process
  • Reaction Injection Molding
  • Using Inserts
  • Stages in the Process
  • Inserts
  • Metal Material Database
  • Multi-Material Overmolding
  • Stages in the Process
  • Multi-Material Overmolding
  • Domain Order
  • Co-Injection Molding
  • Stages in the Process
  • Thick Parts
  • Bi-Injection Molding
  • Stages in the Process
  • Thick Parts
  • Copy and Paste
  • Bi-Injection
  • Injection Start Value
  • Cooling Analysis
  • Stages in the Process
  • Cooling
  • Cooling Channels and Mold Bodies
  • Baffle
  • Bubbler
  • Cooling Simulations
  • Coolant
  • Mold
  • Cool Parameters
  • Cool Analysis
  • Cool Results
  • Exercise 14: Cooling Analysis
  • Warpage Analysis
  • Stages in the Process
  • Shrinkage
  • Warpage
  • Warp Parameters
  • Warp Results
  • Reducing and Fixing Warped Parts

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-plastics-course/feed/ 0 SOLIDWORKS CAM Professional Course https://www.cad-vision.com.my/solidworks-cam-professional-course/ https://www.cad-vision.com.my/solidworks-cam-professional-course/#respond Thu, 07 Jan 2021 03:45:48 +0000 https://www.cad-vision.com.my/?p=16655 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS CAM Professional Course

This course teaches you how to use the SOLIDWORKS CAM Professional software to machine parts utilizing advanced functionality such as: CAM or SOLIDWORKS configurations, VoluMill™, mill machining in the context of an assembly, and 3 plus 2 machinings. Additionally, the course teaches how to generate, modify, and post-process 2 axis turning tool paths used for the machining of SOLIDWORKS part files.

Prerequisites: Experience with the SOLIDWORKS design software.
Experience with the Windows® operating system.
Completion of SOLIDWORKS CAM Standard training class.

Length: 2 days

  • SOLIDWORKS CAM Product Review
  • SOLIDWORKS CAM Configurations
  • Case Study: Using Configurations
  • Exercise 1: Generate Toolpaths for Part Configurations
  • VoluMill Overview
  • Case Study: Using VoluMill
  • Exercise 2: Create VoluMill Toolpaths
  • SOLIDWORKS CAM Assembly Mode
  • Case Study: Assembly Machining Using a Vise
  • Case Study: Assembly Machining -Programming with Subroutines
  • Case Study: Assembly Machining – Multiple Parts
  • Case Study: Assembly Machining Split Instance
  • Exercise 3: Assembly Mode Machining
  • Exercise 4: Assembly Mode Multi-vise Machining
  • Exercise 5: Assembly Mode Split Instance
  • 3 Plus 2 Machining (Indexing)
  • Case Study: 3 Plus 2 – Part Machining
  • Case Study: Assembly Machining with a Tombstone
  • Exercise 6: 3 Plus 2 Machining
  • SOLIDWORKS CAM Turning
  • Case Study: Generate Toolpaths and NC Code
  • Case Study: Interactive Features and Operations
  • Exercise 7: Basic Turning Process
  • Exercise 8: Interactive Turn Features
  • Section Method
  • Case Study: Using Plane Section
  • Case Study: Using Double Chucks
  • Exercise 9: Chucks, ID and OD Features
  • Case Study: Custom Chuck, OD, and Thread Features
  • Exercise 10: Modifying Features and Operations
  • Introduction to Probing
  • Case Study: Probing Operations – Part 1
  • Case Study: Probing Operations – Part 2
  • Case Study: Probing Operations – Part 3
  • Exercise 11: Using Probing Tools

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-cam-professional-course/feed/ 0 SOLIDWORKS CAM Standard Course https://www.cad-vision.com.my/solidworks-cam-standard-course/ https://www.cad-vision.com.my/solidworks-cam-standard-course/#respond Thu, 07 Jan 2021 03:36:04 +0000 https://www.cad-vision.com.my/?p=16650 .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98{ background-repeat:no-repeat; background-image:url(https://www.cad-vision.com.my/storage/2019/04/training-hero-banner-1030x343-1.png); background-position:50% 50%; background-attachment:scroll; } .avia-section.av-ju9gq53a-63250e2490b124886cdc542fb6ba6a98 .av-section-color-overlay{ opacity:0.3; background-color:#383838; }

Training

SOLIDWORKS CAM Standard Course

SOLIDWORKS CAM Standard teaches you how to use the SOLIDWORKS CAM Standard software to generate, modify, and post-process 2.5 axis milling tool paths used for the machining of SOLIDWORKS part files.

Prerequisites: Experience with the SOLIDWORKS design software.
Experience with the Windows® operating system.

Length: 2.5 days

  • What is SOLIDWORKS CAM?
  • SOLIDWORKS CAM User Interface
  • Process Overview
  • Case Study: Generate Toolpaths and NC Code
  • Exercise 1: Generate Toolpaths and NC Code
  • Working with Features, Operations, and Toolpaths
  • Case Study: Working with Features, Operations, and Toolpaths
  • Exercise 2: Generate and Modify Toolpaths
  • Interactive Feature Creation
  • Case Study: AFR and IFR Feature Creation
  • Case Study: IFR 2.5 Axis Feature and Operation Creation
  • Case Study: IFR 2.5 Axis Feature Selection Filters
  • Exercise 3: Interactive Feature Creation
  • Interactive 2.5 Axis Mill Operations
  • Case Study: Interactive Operation Creation
  • Case Study: Create Operations
  • Save Operation Plan
  • Case Study: Save Operation Plan
  • Exercise 4: Interactive Operations
  • Machining Similar Features
  • Case Study: Combine Operations
  • Case Study: Combine Selected Operations
  • Exercise 5: Combine and Link Operations
  • Adding Avoid and Contain Areas
  • Case Study: Add Avoid Area
  • Exercise 6: Avoid Areas
  • Patterning
  • Case Study: Create Linear, Circular, and Sketch Driven Patterns
  • Case Study: Mirror Toolpaths
  • Exercise 7: Pattern and Mirror Toolpaths
  • Camera Animations
  • Camera Movement with the Triad
  • Camera Animation
  • Keyframe Properties
  • Exercise 17: Guitar
  • Exercise 18: Pencil Sharpener Camera Animation
  • SOLIDWORKS CAM Technology Database (TechDB)
  • Case Study: User-Defined Tool Creation
  • Case Study: TechDB Add Machine
  • Case Study: TechDB Add Tool
  • Case Study: TechDB Create and Apply Strategy
  • Exercise 10: User-Defined Tools
  • Exercise 11: Add Tool to Tool Crib
  • Exercise 12: Customize Technology Database

Interested in our Training Courses?

Book a Course Now
]]> https://www.cad-vision.com.my/solidworks-cam-standard-course/feed/ 0