SOLIDWORKS Simulation is fully embedded in SOLIDWORKS 3D CAD for ease of use and data integrity. Using the same user interface (UI) paradigms as SOLIDWORKS with toolbars, menus, and context-sensitive right-click menus, ensures rapid familiarization. Built-in tutorials and searchable online help aid learning and troubleshooting.

SOLIDWORKS Simulation supports SOLIDWORKS materials and configurations for easy analysis of multiple loads and product configurations.

Conduct an optimization study for more than one input variable using Design of Experiments and Optimization parametric study. Run a calculation of design points and find optimum solutions.

• Compressible gas/liquid and incompressible fluid flows
• Subtonic, transonic, and supersonic gas flows
• Ability to take into account heat transfer  by conduction in fluid, solid and porous media. Could be with our without conjugate heat transfer (Fuild-Solid) and with/without heat resistance (Solid-Solid).  

SOLIDWORKS Flow Simulation: A customizable engineering database enables users to model and include specific solid, fluid, and fan behaviors.
SOLIDWORKS Flow Simulation and HVAC Module: The HVAC engineering database extension adds specific HVAC components.
SOLIDWORKS Flow Simulation and Electric Cooling Module: The Electronic Cooling extended engineering database includes specific electronic components and their thermal characteristics.

Calculate the impact of fluid flow through your product.

Calculate the impact of fluid flow around your product.

By default, all calculations are on a full 3D domain. Where applicable, simulations can also be carried out in a 2D plane to reduce run time without effecting accuracy.

The calculation of temperature change in the product’s solid geometry is an option selection. Conjugate heat transfer through convection, conduction, and radiation can be created. Calculations can include thermal contact resistance.

SOLIDWORKS Flow Simulation: Calculate pure heat conduction in solids to identify problems where no fluid exists for fast solutions.

SOLIDWORKS Flow Simulation and HVAC Module: Include materials that are semitransparent to radiation, for accurate solutions where the product’s thermal load is influenced by transparent materials.

SOLIDWORKS Flow Simulation and Electrical Cooling Module: Simulate specific electronics device effects

• Thermoelectric coolers
• Heat pipes
• Joule heating
• PCB lay-ups

Include fluid buoyancy important for natural convection, free surface, and mixing problems.

Ability to simulate moving/rotating surfaces or part to calculate the effect of rotating/moving devices.

Lets you simulate flows with a freely moving interface between two immiscible fluids, such as gas-liquid, liquid-liquid, gas-non-Newtonian liquid.

• Simulation solution times can be reduced by taking advantage of symmetry.
• Cartesian symmetry can be applied to x, y, or z planes.
• Sector period icy allows users to calculate a sector of a cylindrical flow.

Calculation of both ideal and real flows for subsonic, transonic, and supersonic conditions.

• Liquid flows can be described as incompressible, compressible, or as non-Newtonian (as oil, blood, sauce, etc.).
• For water flows, the location of cavitation can also be determined.
  

For flows that include steam water vapor condensation and relative humidity is calculated.

Laminar, turbulent, and transitional boundary layers are calculated using a modified Law of the Wall approach.

Immiscible Mixtures: perform flow of any pair of fluids belonging to gases, liquids, or non-Newtonian liquids.

Determine the flow behavior of Non-Newtonian liquids,  such as oil, blood, sauce, etc.

Problems can be defined by velocity, pressure, mass, or volume flow conditions.

Thermal characteristics for fluids and solids can be set locally and global for accurate setup.

Local and global wall thermal and roughness conditions can be set for accurate setup.

Ability to treat some model components as porous media with the fluid flow through them, or simulating them as fluid cavities with a distributed resistance to fluid flow.

Visualize the stress and displacement of your assembly with customizable 3D plots. Animate the response of your assembly under loads to visualize deformations, vibration modes, contact behavior, optimization alternatives, and flow trajectories.

Provides the standard results components for a structural analysis, such as von Mises stresses, displacements, temperature, etc. The intuitive equation-driven result plot enables you to customize the post-processing of structural analysis results for better understanding and interpretation of product behavior.

Create and publish customized reports for communicating simulation results and collaborating with eDrawings®.

Ability to calculate (with the post-processor) in the obtained fields of results, motions of the specified particles (Particle Studies) or flows of the specified extraneous fluids (Tracer Study) in the fluid flow, which does not affect this fluid flow.

Noise prediction using a fast Fourier Transformation (FFT) algorithm that converts a time signal to the complex frequency domain for transient analysis.

Include materials semi-permeable to radiation for accurate thermal analysis.

HVAC applications vary widely. Considerations for meeting requirements for thermal performance and quality include airflow optimization, temperature, air quality, and containment control.

Understand and evaluate thermal comfort levels for multiple environments using thermal comfort factor analysis.

• Heat Pipes
• Thermal Joints
• Two-resistor Components
• Printed Circuit Boards
• Thermoelectric Coolers